2點グリッパ — パラレル2點グリッパ
パラレル2點グリッパ FCH90 シリーズ
このグリッパは長いストロークを持つ小型の軽量です。それは、低い高さが、長い添付ファイルが固定されている場合でも、スムーズに動作します。
このグリッパは長いストロークを持つ小型の軽量です。それは、低い高さが、長い添付ファイルが固定されている場合でも、スムーズに動作します。
FCH-91 | FCH-92 | FCH-93 | |
Working media | Filtered air | ||
Operating pressure | 3 at 7 bar | ||
Ambient temperature 0C | 5 at 60 | ||
Lubrication | Normally not required. (But if necessary, use 1st sort of turbine oil equivalent of ISO VG32) | ||
Repetitive accuracy | Initial value: +- 0.1 mm, At 2 million cycles: +- 0.2 mm | ||
Life | 2 million cycles on condition that the load is evenly applied to each finger | ||
Cylinder bore (mm) | 6 | 10 | 15 |
Stroke (mm) | 10 | 15 | 20 |
Exhaust volume (cc) | 0.16 | 0.63 | 1.9 |
Max cycle per minute | 90 | ||
Finger’s movement | Double acting | ||
Gripping force Close, Open | 18(P-0.18N) | 64(P-0.18N) | 110(P-0.06N) |
Weight | 45 g | 120 g | 280 g |
Max. length of attachment from finger end (cm) | 1.6 | 2.5 | 5 |
Max. weight of one attachment | 15 g | 30 g | 55 g |
FCH90 Catalog
1 file(s) 10.76 MBFCH90 2D CAD
1 file(s) 54.52 KBFCH90 3D CAD
1 file(s) 133.45 KB
パラレル2點グリッパ FCHZ シリーズ
精度リニアガイドとユニボディデザイン、高剛性、高精度
精度リニアガイドとユニボディデザイン、高剛性、高精度
Item No | FCHZ-10 | FCHZ-16 | FCHZ-20 | FCHZ-25 | FCHZ-32 | FCHZ-40 |
Bore size (mm) | 10 | 16 | 20 | 25 | 32 | 40 |
Working media | Air | |||||
Acting | Double action | |||||
Operating pressure kgf/cm²(kpa) |
2~7(200~700) | 1~7(100~700) | ||||
Ambient temperature 0C | -10~60 | |||||
Max cycle per minute | 180 | 60 | ||||
Gripping open, close precision (mm) | ±0.01 | ±0.02 | ||||
Lubrication | Not required |
FCHZ Catalog
1 file(s) 10.76 MBFCHZ 2D CAD
1 file(s) 410.27 KBFCHZ 3D CAD
1 file(s) 829.17 KB
パラレル2點グリッパ FCHL シリーズ
特別なシール設計、長寿命
特別なシール設計、長寿命
Item No | FCHL-20 | FCHL-32 |
Bore size (mm) | 20 | 32 |
Working media | Air | |
Acting | Double acting | |
Operating pressure kgf/cm²(kpa) |
2~7(200~700) | |
Ambient temperature 0C | 5~60 | |
Withstanding pressure kgf/cm²(kpa) |
10(1000) | |
Theoretical gripping moment (M) kgf-cm / closed side |
3 | 10 |
Max length of attachment from finger end (mm) |
50 | 70 |
Opening and closing stroke (mm) |
14 | 16 |
Port size | M5×0.8 |
● L: 指先=30ミリメートル。M: 理論的な把持モーメント。P: 圧力=5kgf/ cm 2で
FCHL Catalog
1 file(s) 10.76 MBFCHL 2D CAD
1 file(s) 119.73 KBFCHL 3D CAD
1 file(s) 638.90 KBパラレル2點グリッパ FCHT シリーズ
デュアルピストン設計、増加把持力
デュアルピストン設計、増加把持力
FCHT-10 | FCHT-16 | FCHT-20 | FCHT-25 | FCHT-32 | |
Bore size (mm) | 10 | 16 | 20 | 25 | 32 |
Working media | Air | ||||
Acting | Double action | ||||
Operating pressure kgf/cm²(kpa) |
1.5~7(150~700) | ||||
Ambient temperature 0C | 0~60 | ||||
Max cycle per minute | 40 | ||||
Lubrication | Supply free way | ||||
Holding force kgf(N) | 1.4(14) | 4.5(44) | 7.4(73) | 13.1(128) | 22.9(191) |
Max length of attachment from finger end (L) (mm) |
40 | 60 | 80 | 90 | 100 |
Opening and closing stroke (mm) | 20,40,60 | 30,60,80 | 40,80,100 | 50,100,120 | 70,120,160 |
Pore size | M5×0.8 | ||||
Magnet device | Magnet device included |
● L: 指先=30ミリメートル。M: 理論的な把持モーメント。P: 圧力=5kgf/ cm 2で
FCHT Catalog
1 file(s) 10.76 MBFCHT 2D CAD
1 file(s) 888.51 KBFCHT 3D CAD
1 file(s) 1.11 MB関連製品:
バルブ | エアシリンダ | ハイロータ | 調質・発生源機器 | インスタント継手 | チューブ |